modifying line length in draftsight 2016

To assign a specific line style to a line in a drawing, click on the line.

sldlin file for backup purposes or sharing with colleagues) (Note: the “Save” button saves all the line styles to an external.

Click “OK” to save the new line style.

Enter the line length and spacing values, as shown below.

Select Tools -> Options -> Document Properties -> Line Style, as shown below.Ĭlick on the “New” button, enter a name to identify the line style and press Enter to save it, as shown below.

(If you want the line style to be available in all drawings, do this in your drawing template) To create a new line style for a drawing: We saved the line style, calling it “Nothing”, assigned it to the lines in question and they disappeared! Exactly what our customer wanted.Ĭreating a new line style and assigning it to a line, in more detail:

The resultant line style formatting, as shown above, was: This suited the scale of the drawing, but could be increased if necessary. Line segment length set to 0.00001, which is one hundred thousandth of a mm.In this case we effectively wanted a line that was all gap, ie, nothing visible, so we created a new line style with the following formatting: The third line is the same as the first line, but it has bold segments at each end of the line because the first character is a B instead of an A.The second line has a segment 1mm long, followed by a gap of 1mm, then a line 0.5mm long, followed by a gap of 0.5mm, and this pattern is repeated for the length of the line.The first line has a segment 1mm long, followed by a gap of 1mm, and this pattern is repeated for the length of the line.Here are some examples of line style formats and how the lines look. A negative value indicates a gap between segments.A positive value indicates a physical line segment.The numbers control the line segment lengths and gap lengths. The line style format we used was: A, 0.0001, -100. We were able to achieve what he wanted by creating a new line style that was effectively blank and assigning that to the lines in question. Unfortunately the usual technique of right-clicking on the lines and selecting “Hide/Show Edges” didn’t give him the result he wanted. The view was set to the usual display mode of “Hidden Lines Removed”, but removing a few extra visible lines would make the view clearer and easier to understand. Thank you for reading.Recently a customer wanted to hide just a few lines from a drawing view. Jogged dimension measures the Radius of the arc or circle.īut the difference between the Radius dimension and the Jogged dimension is, in the Jogged dimension, you can set the dimension text location as per requirement by yourself.Īnd the dimension line will show in a Jogged shape.Īlso, read out other articles about AutoCAD quarries.

This type of dimension is mostly used in the center-line plan or line plan for showing beam and column positions. The ordinate dimension measures horizontal and vertical length from the (0,0) origin ordinates in x-direction and y-direction. ‘Diameter means the length of the straight line which passes through the center of the circle and touches the outer boundary of the circle.’ 7. The diameter measures the diameter of any circle or arc. ‘Radius means the length of line from the center of the circle to the outer boundary of the circle.’ 6. The Radius measures the radius of the circle and arc. Arc lengthĪrc length measures the length of the arc or length of the segment of any polyline. It also measures the angle of the arc or angle between two points of the circle. Angular dimensionĪngular dimension measures the angle between two lines whether both are joint or not. Align dimension means we can measure the proper dimension of the sloped lines. The Align dimension is created to align the dimension of lines. Linear dimension is create linear dimensions for all types of lines. Types of Dimension in AutoCAD Types of Dimensions: 1.

Modifying line length in draftsight 2016